Amsoil Saber outboard 2 cycle oil 100:1

Amsoil Saber outboard 2 cycle oil 100:1. Get it in bottles or bulk drums. Designed for pre-mix applications as lean as 100:1 ratios or richer.

Saber (ATO) was designed for outboard motors and contains low-temp additives that assist in reducing varnish and carbon build up in water cooled engines. Saber Outboard is excellent in personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Our low-smoke, odor, and toxicity properties create fewer emissions at 100:1 mix ratios than oils mixed at 50:1, which benefits it's operators and the environment. Saber Outboard is created to prevent oil loading and plug fouling for quik throttle response, making it great for slow trolling motors. Recommended for pre-mix use where TC-W3 or API TC is specified.

Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.

Saber outboard 2 cycle oil. bulk ot bottles

2.6 oz.	per 1 U.S. gallon	50:1
8 oz.	per 5 U.S. gallons	80:1
1.3 oz.	per 1 U.S. gallon	100:1
8 oz.	per 6 U.S. gallons	100:1

TYPICAL TECHNICAL PROPERTIES Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO)
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)	17.9
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)	141.2
Viscosity Index (ASTM D-2270)	141
Pour Point °C (°F) (ASTM D-97)	-33 (-27)
Flash Point °C (°F) (ASTM D-92)	120 (248)
Fire Point °C (°F) (ASTM D-92)	138 (280)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact.KEEP OUT OF REACH OF CHILDREN.

Amsoil Saber outboard 2 cycle oil

Amsoil Ordering Menu