Product Code: ATPPK-EA
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5- oz. container which is ideal for treating the 2 – 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber Professional also works well in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft and now has stabilizer built into the formulation so there is no need to have an additional product for storage. Saber Professional is formulated with high-temperature detergent additives to help prevent hard carbon deposits from forming in these hot-operating motors. Saber Professional is smokeless and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC is specified.
Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix
ratios may be used where desired.
2.6 oz. | per 1 U.S. gallon | 50:1 |
8 oz. | per 5 U.S. gallons | 80:1 |
1.3 oz. | per 1 U.S. gallon | 100:1 |
8 oz. | per 6 U.S. gallons | 100:1 |
Already Know what Amsoil products you want, so why not buy wholesale direct from the factory as a preferred customer!
Why wait? Get an Amsoil Free Catalog or try a Trial Preferred Customer Membership Today. Maybe you would like to Sign up as a dealer, commercial or retail account for your repair shop, business or store?
All of these accounts get wholesale pricing and other discounts.
As an AMSOIL Preferred Customer you will enjoy the following benefits:
Factory direct ordering at wholesale cost. Save approximately 25%.
Fast delivery to your door.
Easy online or phone ordering.
No minimum or maximum order sizes.
Receive the latest AMSOIL product catalogs.
Free subscription to the monthly AMSOIL Magazine.
If you would like to contact us or have questions or feedback about our products and services, please send your request using the form below. Feel free to call with your questions.
Amsoil Preferred customer or Dealership Information Request form
TYPICAL TECHNICAL PROPERTIES
Saber? Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP) |
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
|
13.5 |
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
|
99 |
Viscosity Index (ASTM D-2270)
|
136 |
Pour Point °C (°F) (ASTM D-97)
|
-36 (-33) |
Flash Point °C (°F) (ASTM D-92)
|
114 (237) |
Fire Point °C (°F) (ASTM D-92)
|
114 (237) |
DANGER: harmful or fatal if
swallowed. Contains synthetic lubricant and petroleum
distillates. If swallowed do not induce vomiting. Contact a
physician immediately. Keep away from fire, heat and open flame.
Use with adequate ventilation. Avoid frequent or prolonged skin
contact. Flush eyes with water for 15 minutes in case of contact.
KEEP OUT OF REACH OF
CHILDREN.
|